Marcas
 
Carrinho
Carrinho vazio
 
Mais vendidos
11961 T plug with groove 1 par 11961 T plug with groove 1 par
0,60€  
Servo Extension  Cable 300mm Futaba  26# Servo Extension Cable 300mm Futaba 26#
0,70€  
FJT100-1 Servo Extension Cable 100mm Futaba 26# FJT100-1 Servo Extension Cable 100mm Futaba 26#
0,40€  
VELA OS No.8 VELA OS No.8
5,70€  
Male XT60 connectors  (1 pc ) GENUIN Male XT60 connectors (1 pc ) GENUIN
0,90€  
Servo Extension Y Cable 300mm Futaba 26# Servo Extension Y Cable 300mm Futaba 26#
1,00€  
Servo Extension Cable 200mm Futaba 26# Servo Extension Cable 200mm Futaba 26#
0,50€  
CHAPA BALSA 2x100x1000 mm. CHAPA BALSA 2x100x1000 mm.
1,80€  
Female XT60 connectors (1 pc ) GENUINE Female XT60 connectors (1 pc ) GENUINE
0,90€  
TPD04 Gold Bullet Connector Plug 4 mm (par) TPD04 Gold Bullet Connector Plug 4 mm (par)
0,35€  
Arame de aço  para linkagem  2,0mm x1000mm (Uni: 1) Arame de aço para linkagem 2,0mm x1000mm (Uni: 1)
1,00€  
Graupner Balsa  1X100X1000MM Graupner Balsa 1X100X1000MM
0,90€  
EC5 Style Connector (5.0mm)  1 PAR EC5 Style Connector (5.0mm) 1 PAR
1,50€ 1,30€  
Arame de aço  para linkagem 1,5mm x 1000mm  (Uni: 1) Arame de aço para linkagem 1,5mm x 1000mm (Uni: 1)
0,90€  
Rcexl Opto Gas Engine Kill Switch Version 2.0 Rcexl Opto Gas Engine Kill Switch Version 2.0
14,90€  
HELICE NYLON 11X6 HELICE NYLON 11X6
1,50€  
HELICE NYLON 10X6 HELICE NYLON 10X6
2,30€  
Gold Bullet Connector Plug 6 mm  (par) Gold Bullet Connector Plug 6 mm (par)
0,60€  
Tubo para gasolina  (7*4mm) Amarelo Tubo para gasolina (7*4mm) Amarelo
3,80€  
CHAPA BALSA 6x100x1000 mm. CHAPA BALSA 6x100x1000 mm.
2,70€  
HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V) HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V)
11,60€  
Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S) Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S)
3,60€  
CHAPA BALSA 3MM  X 100 X 1000 CHAPA BALSA 3MM X 100 X 1000
3,75€  
Vara de fibra de carbono maciço diam. 2.0mm.x1mt Vara de fibra de carbono maciço diam. 2.0mm.x1mt
1,90€  
Turnigy LSD 4.8V 2300mAh Ni-MH Flat Receiver Pack Turnigy LSD 4.8V 2300mAh Ni-MH Flat Receiver Pack
9,90€  
JP FUEL FILTERS (2 uni:) JP FUEL FILTERS (2 uni:)
1,30€  
25100 ELASTICOS 100MM (10 uni:) 25100 ELASTICOS 100MM (10 uni:)
2,50€  
ZAP Z-EPOXY 30Min. (bote 237 ml.) ZAP Z-EPOXY 30Min. (bote 237 ml.)
17,50€  
Vara de fibra de carbono maciço diam.3mmx1000mm Vara de fibra de carbono maciço diam.3mmx1000mm
3,10€  
EXHAUST DEFLECTOR MEDIUM (40-53 SIZE) EXHAUST DEFLECTOR MEDIUM (40-53 SIZE)
3,60€  
Sponge Wheel D60 x H19 xΦ3mm Uni:1 Sponge Wheel D60 x H19 xΦ3mm Uni:1
2,25€  
Rcexl Cable Plug Holder  10pcs Rcexl Cable Plug Holder 10pcs
3,80€  
Heavy Duty 22# Flat Cable 450mm Futaba Color Heavy Duty 22# Flat Cable 450mm Futaba Color
0,70€  
22# Heavy duty Flat extension Y cable 300MM Futaba Color 22# Heavy duty Flat extension Y cable 300MM Futaba Color
1,00€  
Lipo battery voltage tester and Low voltage buzzer alarm Lipo battery voltage tester and Low voltage buzzer alarm
6,30€  
042774 Threaded rods M3 200mm 042774 Threaded rods M3 200mm
0,70€  
PT37 Z-POXY 5-MIN 4oz PT37 Z-POXY 5-MIN 4oz
13,60€  
Z22003S-25  ZIPPY Flightmax 2200mAh 3S1P 25C Z22003S-25 ZIPPY Flightmax 2200mAh 3S1P 25C
22,00€  
 Gold Coated Banana Connector Set 3.5mm with housing ( Uni: 1) Gold Coated Banana Connector Set 3.5mm with housing ( Uni: 1)
0,65€  
CNC Alloy Servo Arm Long (Futaba) CNC Alloy Servo Arm Long (Futaba)
7,10€  
 

Bixler 2 EPO 1500mm (59") Glider PNP

Bixler 2 EPO 1500mm (59") Glider PNP
Clique para ampliar
Preço: 118,00€
Disponibilidade: Contat antoni@grotomodelismo.com
Referencia: 9310000333-0
Classificação média: Sem classificação

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling of the uprated motor. 
 
This version of the Bixler® ™ 2 comes as a "Plug and Play" which means that you will need a 6CH 2.4GHz radio system, a 3S 2200mAh lipoly battery and a battery charger. Just finish the assembly of the plane, setup your radio system and add your battery, power up the model and fly. It's that easy!
 
The Bixler® ™ 2 has all the right ingredients, made from super tough EPO foam, everything is pre-installed so minimal assembly time is required, in fact, by the time you have charged a battery, it should be ready to fly! The combination of size, low wing loading and a sleek fuselage makes for an excellent model with capable yet forgiving flight characteristics. The plug in wing makes the Bixler® ™ a practical model that is easy to transport to your favorite flying field and can be ready to fly in just minutes. Another practical feature of the Bixler® ™ 2 is its ability to accept a wide range of Lipoly sizes and/or FPV equipment courtesy of the enlarged canopy area. The Bixler® ™ 2 also comes with optional flaps which are pre-hinged (servos not included). The flaps are particularly ideal for FPV pilots carrying a heavier payload. The final improvement was to re-design the boom area to allow the Bixler® ™ 2 use a low KV motor and larger prop combo, which is more efficient and offers a more linear throttle response.
 
The larger wing, flaps & much larger canopy area mean that the Bixler® ™ 2 is now so much more versatile in terms of FPV use and for new pilots and experienced pilots alike who are simply flying for fun, these new design features, combined with the larger, more efficient prop mean that the Bixler® ™ 2 offers longer flight times. However you decide to fly the Bixler® ™ 2, you can be assured that it is still just as easy and fun to fly as ever!
 
Features:
• Easy and Fun to Fly
• Easy, Fast and Simple Assembly
• New Larger Canopy area to accommodate FPV equipment and/or larger flight battery
• Pre-Installed Servo's & Brushless Motor
• Larger Wing Span for greater glide & Payload Carrying Capability
• Bigger air inlet to keep the motor cool.
• Plastic Landing Skid
• New, lower KV Brushless Motor/larger Prop Combo for Greater Efficiency
• Pre-Installed Optional Flaps Mounted on Plastic Hinges (require Servos for operation - not included)
• Plug In Wings for Easy Transportation
• Pre-Installed Round Pin Hinges on Rudder & Elevator
 
Specs:
Material: EPO Foam
Wingspan: 1500mm
Length: 963mm
Flying Weight: 760g
ESC: 20A
Motor: 2620-1300KV Brushless Outrunner
Servo: 4 x 9g
Prop: 7x5
 
Includes:
Instructions
Screwdriver
2 x Y Leads
2 x 150mm extension servo leads
Hook & Loop 
2 x Spare Clevis
Horns & control Rods for Optional Flaps
 
Recommended:
1 x 2.4GHz 6CH transmitter and receiver
1 x 2200mAh 3S 20C lipoly battery
1 x battery charger
2 x 9g servo for flaps (optional)
1 x Servo Reverser if using optional flaps
Escrever opinião
Nome:


Opinião: Note: HTML não está traduzido!

Classificação: Mau            Bom

Entre o código na caixa abaixo:

Não há imagens adicionais para este artigo.