Marcas
 
Carrinho
Carrinho vazio
 
Mais vendidos
11961 T plug with groove 1 par 11961 T plug with groove 1 par
0,60€  
Servo Extension  Cable 300mm Futaba  26# Servo Extension Cable 300mm Futaba 26#
0,70€  
FJT100-1 Servo Extension Cable 100mm Futaba 26# FJT100-1 Servo Extension Cable 100mm Futaba 26#
0,40€  
VELA OS No.8 VELA OS No.8
5,70€  
Male XT60 connectors  (1 pc ) GENUIN Male XT60 connectors (1 pc ) GENUIN
0,90€  
Servo Extension Y Cable 300mm Futaba 26# Servo Extension Y Cable 300mm Futaba 26#
1,00€  
Servo Extension Cable 200mm Futaba 26# Servo Extension Cable 200mm Futaba 26#
0,50€  
CHAPA BALSA 2x100x1000 mm. CHAPA BALSA 2x100x1000 mm.
1,80€  
TPD04 Gold Bullet Connector Plug 4 mm (par) TPD04 Gold Bullet Connector Plug 4 mm (par)
0,35€  
Female XT60 connectors (1 pc ) GENUINE Female XT60 connectors (1 pc ) GENUINE
0,90€  
Arame de aço  para linkagem  2,0mm x1000mm (Uni: 1) Arame de aço para linkagem 2,0mm x1000mm (Uni: 1)
1,00€  
Graupner Balsa  1X100X1000MM Graupner Balsa 1X100X1000MM
0,90€  
EC5 Style Connector (5.0mm)  1 PAR EC5 Style Connector (5.0mm) 1 PAR
1,50€  
Arame de aço  para linkagem 1,5mm x 1000mm  (Uni: 1) Arame de aço para linkagem 1,5mm x 1000mm (Uni: 1)
0,90€  
HELICE NYLON 10X6 HELICE NYLON 10X6
2,30€  
HELICE NYLON 11X6 HELICE NYLON 11X6
1,50€  
Rcexl Opto Gas Engine Kill Switch Version 2.0 Rcexl Opto Gas Engine Kill Switch Version 2.0
15,50€  
Gold Bullet Connector Plug 6 mm  (par) Gold Bullet Connector Plug 6 mm (par)
0,60€  
HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V) HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V)
11,60€  
Tubo para gasolina  (7*4mm) Amarelo Tubo para gasolina (7*4mm) Amarelo
3,80€  
CHAPA BALSA 6x100x1000 mm. CHAPA BALSA 6x100x1000 mm.
2,70€  
CHAPA BALSA 3MM  X 100 X 1000 CHAPA BALSA 3MM X 100 X 1000
3,75€  
Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S) Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S)
3,60€  
Vara de fibra de carbono maciço diam. 2.0mm.x1mt Vara de fibra de carbono maciço diam. 2.0mm.x1mt
1,90€  
CHAPA BALSA 1,5x100x1000 mm. CHAPA BALSA 1,5x100x1000 mm.
1,50€  
Turnigy LSD 4.8V 2300mAh Ni-MH Flat Receiver Pack Turnigy LSD 4.8V 2300mAh Ni-MH Flat Receiver Pack
9,00€  
JP FUEL FILTERS (2 uni:) JP FUEL FILTERS (2 uni:)
1,30€  
Vara de fibra de carbono maciço diam.3mmx1000mm Vara de fibra de carbono maciço diam.3mmx1000mm
3,10€  
Sponge Wheel D60 x H19 xΦ3mm Uni:1 Sponge Wheel D60 x H19 xΦ3mm Uni:1
2,25€  
22# Heavy duty Flat extension Y cable 300MM Futaba Color 22# Heavy duty Flat extension Y cable 300MM Futaba Color
1,00€  
ZAP Z-EPOXY 30Min. (bote 237 ml.) ZAP Z-EPOXY 30Min. (bote 237 ml.)
17,50€  
Rcexl Cable Plug Holder  10pcs Rcexl Cable Plug Holder 10pcs
3,80€  
042774 Threaded rods M3 200mm 042774 Threaded rods M3 200mm
0,70€  
EXHAUST DEFLECTOR MEDIUM (40-53 SIZE) EXHAUST DEFLECTOR MEDIUM (40-53 SIZE)
3,60€  
Z22003S-25  ZIPPY Flightmax 2200mAh 3S1P 25C Z22003S-25 ZIPPY Flightmax 2200mAh 3S1P 25C
22,00€  
25100 ELASTICOS 100MM (10 uni:) 25100 ELASTICOS 100MM (10 uni:)
2,50€  
PT37 Z-POXY 5-MIN 4oz PT37 Z-POXY 5-MIN 4oz
13,60€  
Lipo battery voltage tester and Low voltage buzzer alarm Lipo battery voltage tester and Low voltage buzzer alarm
6,30€  
CNC Alloy Servo Arm Long (Futaba) CNC Alloy Servo Arm Long (Futaba)
7,10€  
 Gold Coated Banana Connector Set 3.5mm with housing ( Uni: 1) Gold Coated Banana Connector Set 3.5mm with housing ( Uni: 1)
0,65€  
 

TLR Eight 4.0 1/8 TT 4WD Race Roller KIT

TLR Eight 4.0 1/8 TT 4WD Race Roller KIT
Clique para ampliar
Preço: 535,00€
Disponibilidade: Envio em 3 dias
Referencia: TLR04003
Classificação média: Sem classificação

DESCRIÇÃO DO PRODUTO
Mais Informação : https://www.horizonhobby.de/en/8ight-40-race-kit--1-8-4wd-nitro-buggy-tlr04003

Overview
The story of the 8IGHT platform is the story of a champion – one that encompasses multiple ROAR national titles in addition to major wins on the international stage. The 8IGHT 4.0 buggy builds on this championship-winning heritage with updates to the suspension geometry and drivetrain layout that make it both easier to drive and tougher to beat.
Revised Suspension Geometry
New suspension geometry makes it easier for drivers of all experience levels to turn faster lap times with fewer mistakes, particularly during brutal, hour-long mains.
Optimized Drivetrain Layout
The engine has been repositioned to reduce front driveshaft angle so more power makes it to the front wheels.
Ball Bearing Actuators
The revised throttle actuator now uses bearings to further improve throttle and brake response. It also features a new brace that prevents flexing during heavy braking.
Large Bearing Spindles and Hubs
Front spindles and rear hubs have been revised to accept a larger 8 × 16 × 5 outer bearing for increased durability.
Revised Chassis Side Guards
The chassis side guards have been updated for a better fit. They also feature indentations for the Velcro body strips.
Large-Footprint Engine Mount
In addition to its new position, the engine mount has been designed with a larger footprint that substantially reduces chassis flex and fatigue underneath the engine when racing on high-grip tracks.
Adjustable Caster Blocks
The adjustable, 15-degree caster blocks make it possible to tune dog bone plunge by changing the height of the spindle.
New Bleeder Shock Caps and Seals
The new bleeder shock caps and internal seals allow for easier rebuilds while using an emulsion shock setup. New bushings that press into the shock cap further improve durability.
Driveshaft and Dog Bone Boots
Molded rubber boots on the universals and center drivetrain dog bones increase U-joint life by holding lubrication in and keeping dirt out.
Redesigned Shock Towers
The machined aluminum shock towers have new camber link and shock location holes that give racers more tuning options for changing track conditions.
Weight Ballast-Ready
The chassis has been designed to accommodate hard-mount ballast weights so it is easier to meet the ROAR minimum weight requirement.
Cab-Forward Body
The cab-forward body moves aerodynamic pressure further forward on the car, which improves steering.

Key Features
Durable 4mm hard-anodized 7075 T-6 aluminum chassis
Improved suspension geometry
Reduced front driveshaft angle
Ball bearing throttle and brake actuators
Large-bearing spindles and hubs
Revised chassis side guards
Larger engine mount that reduces chassis flex
15° caster blocks with adjustable spindle height
Aluminum shock caps with threaded bleeder holes
Molded driveshaft and dog bone boots
Aluminum shock towers with updated camber link and shock location holes
Weight ballast-ready to meet ROAR minimum weight requirement

Approximate Assembly Time:3-5 HoursBall Bearings:Yes â?? ThroughoutBatteries:Not includedBody:8 3.0 Cab Forward, unpaintedBrakes:DiscCharger:Not includedChassis:4mm, 7075 T-6 Aluminum, Hard AnodizedCompletion Level:KitDifferential:Sealed viscous filled gear differentialDrivetrain:4WDEngine Size:.21â??.31 size engine (not included)Final Drive Ratio:11.9:1Front Track:12.0 in (305mm)Fuel Tank Capacity:4.2 oz (125cc)Gear Pitch:1.0 ModuleGround Clearance:2.4 in (60mm)Height:7.1 in (180mm)Internal Gear Ratio:3.23:1Length:19.6 in (497mm)Pinion:13TRadio:Not includedRear Track:12.1 in (307mm)Servos:Not includedShock Type:Aluminum, Oil-FilledSize/Scale:1/8Spur Gear:48TSuspension:IndependentTrack:12.1 in (307mm)Vehicle Type:BuggyWeight:Varies on equipment usedWheel Diameter:3.3 in (83.5mm)Wheel Type:DishWheel Width:1.7 in (42mm)Wheelbase:12.7â??12.9 in (323â??327mm)Width:12.1 in (308mm)
Escrever opinião
Nome:


Opinião: Note: HTML não está traduzido!

Classificação: Mau            Bom

Entre o código na caixa abaixo:

Não há imagens adicionais para este artigo.