Marcas
 
Carrinho
 1 x  EB4 S2 Steel Main Gear
 1 x  M. FLYBAR C. LEVER, E325 (flybar) MINI TITAN
 1 x  BRAZO BARRA ESTABILIZADORA MINI TITAN OP
 1 x  EIXO PRINCIPAL ENDURECIDO
 1 x  ONE WAY CLUTCH SHAFT 30/50 V1 & V2
 1 x  Clutch Shoes RG SC1/8
 1 x  Lower Suspension Arms MTA-4
 1 x  TRIANGULOS FRE-TRAS.SUP. SS
 1 x  Front Knuckles EB-4 S3 MTA-4 G3
 1 x  TRIANGULOS INFERIORES FRENTE EB-4 S3
 1 x  ESPUMA para PNEU PRO THUNDER (Uni: 4)
 1 x  Rear Suspension Arm TOMA VX-MX
 1 x  Cubos traseiros EB-4 SC1/8
 1 x  Upper Suspension Arms MTA-4, e-MTA
 1 x  FRENTE Suspension Arms TOMA VX-MX
 1 x  BOLA PIVOTE TRAS. EB-4 S3 MTA-4 G3, 4 PCES
 1 x  Clip de Biela PRO SE 40/46/54S/50BK
 1 x  RODAMIENTO UNIDIRECCIONAL TS-4OP
 1 x  ESCAPE SS-SSK-TOMA MX
 1 x  MOLAS DE EMBREAGEM 4PZ
 1 x  Upper Arm/Mount/End Front EB-4 S2 GRIS
 1 x  BASE PLATE, E325 MINI TITAN
 1 x  SERVO TRAY, E325 MINI TITAN
 1 x  MOTOR MOUNT, E325 MINI TITAN
 1 x  BLADE HOLDER, E325
 1 x  ALERON Y SOPORTE SSB
 1 x  Lower Suspension Arm EB4/S2
 1 x  METAL WASHOUT BASE R50 SE
 1 x  Washout Linkage R50 Titan SE
 1 x  Flybar Control Lever R50
 1 x  TAIL SUPPORT BRACKET;R50 50T SE
 1 x  One-Way Clutch Shaft R50 SE
 1 x  Pinion Block Titan SE
 1 x  Flybar Control Arm, Titan SE
 1 x  Flybar Seesaw R50 SE
 1 x  S/S Tail Hub, V2 50-90
 1 x  METAL IDLE PULLEY TITAN SE
 1 x  TC0062 Clunk tank 250 ccm, gasoline resistent, incl. fittings
 1 x  TC0051 Clunk tank 1000 ccm, gasoline resistent, incl. fittings
 1 x  TC0065 Clunk tank 750 ccm, gasoline resistent, incl. fittings
 1 x  Micro Servo MS2414
 1 x  VOLANTE INERCIA ALIGERADO 2P SSK V2
 1 x  Xoar Hélice Madera PJA 24x10 Sport
 1 x  Xoar Hélice Madera PJA 19x6 Sport
 1 x  HELICE MADERA PJA 16x8 (sport)
 1 x  Xoar Hélice Madera PJA 16x6 Sport
 1 x  PRETTY (ARF GLIDER) Inc B/LESS MOTOR/ESC
 1 x  JANTE radios cruzados plata+PNEU. 1/8
 1 x  Main control link calisto
 1 x  Whisper tipo II grande apartir 7,5ccm
 1 x  U.P.S. universal power servo JR
 1 x  Throttle/Brake Hardware Set EB-4
 1 x  THROTTLE SERVO ARM T
 1 x  TAPACUBOS DORADO SSR
 1 x  SWASHPLATE, E325
 1 x  Steering Ball (10).M 4MM EB-4
 1 x  Shock Piston, 1-Hole EB-4
 1 x  Shock Diaphragm EB-4
 1 x  SHOCK BALL JOINT TS-E
 1 x  Servo Saver Metal Parts EB-4
 1 x  Rotation holder assembly Calisto
 1 x  Rear Drive Shaft (2 Pcs.) EB-4
 1 x  370295 F/A-18E HORNET ARTF
 1 x  E-FLITE Night Radian 2.0M BNF
 1 x  motor for SMQ600
 1 x  Turnigy Aerodrive SK3 - 2830-920kv 148W
 1 x  Part 26 Phantom Self-tightening Prop(CW+CCW)
 1 x  Phantom Landing Gear
 1 x  Phantom Compass
 1 x  Part 23 DJI Phantom motor cap (CW) 2 pcs
 1 x  Part 27 - Propeller Mounting Tool
 1 x  9045 CF Propeller CW&CCW For DJI 2212 motor
 1 x  Part20 Phantom 2 Vision Rubber Damper(4pcs)
 1 x  9.4 x 4.3 inch 3K Carbon Propeller Set (one CW, one CCW) - for DJI Phantom V2
 1 x  8.4x 4.3 inch / 8443 3K Carbon Propeller Set (one CW, one CCW) W/ self-lock
 1 x  DJI F450/F550 Landing Skid Set
 1 x  5.6mm x 30mm M3 Nylon Tapped Spacer (10pc)
 1 x  QUAD MAIN BLADES (BLACK) (2)
 1 x  QUAD MAIN BLADES (RED) (2)
 1 x  5.6mm x 14mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 21mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 15mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 36mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 26mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 13mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 28mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 18mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 12mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 20mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 16mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 10mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 25mm M3 Nylon Tapped Spacer (10pc
 1 x  5.6mm x 6mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 31mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 24mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 18mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 22mm M3 Nylon Tapped Spacer (10pc)
 1 x  5.6mm x 12mm M3 Nylon Threaded Spacer (10pc)
 1 x  5.6mm x 8mm M3 Nylon Tapped Spacer (10pc)
 1 x  5030 Propellers (Red) - 3xCW and 3xCCW - 6pcs per bag
 1 x  Simple Prop Balancer
 1 x  8X4.5inch 3K Carbon Propeller Set (one CW, one CCW) W/ self-lock nut for DJI
 1 x  HQProp 6X4.5R CWcarbon reinforced (pack of 2)
 1 x  HQProp 6X4.5 CCWcarbon reinforced (pack of 2)
 1 x  9050 DJI Carbon Fiber Propeller for DJI 2212 Motor
 1 x  COMBO TLR EighT 4.0 + Novarossi 3B Turbo + Escape In-Line
 1 x  COMBO TLR EighT 4.0 + OS XR-B II + Escape EFRA 2135
 1 x  TLR Eight 4.0 1/8 TT 4WD Race Roller KIT
 1 x  J'EN Pitts Muffler .32 to .46
 1 x  S61601 SC SILENCER 61 (S-TYPE)
 1 x  Exhaust Pipe(EME55/DLE55)
 1 x  PARAFUSOS ESCAPE PRO/GP61
 1 x  ESCAPE ESPECIAL PRO 120 (TIPO PITTS)
 1 x  91601A SC SILENCER 91/108 MKII
 1 x  M3 PRESSURE NIPPLES
 1 x  M4 PRESSURE NIPPLES
 1 x  AGULHA DAS ALTAS SC91-120 12861X
 1 x  ASP FS61AR - Cylinder
 1 x  ASP S46H - Carb Assy
 1 x  ASP S61A - Cylinder Piston Set
 1 x  Spark plug caps and boots for NGK -CM6-10MM
 1 x  ASP S61A11 - Remote Needle Assy
 1 x  CNC Alloy Throttle Arm for Gas Engines
 1 x  Rcexl Spark plug caps and boots for 1/4-32 KIT 90degree
 1 x  Rcexl In 1/4-32 Spark Plug Cap Spring 2PCS
 1 x  Raptor 50 Piston Ring: Pro-50H(R)
 1 x  CNC Aluminum Alloy Air Horn Inlet (Azul ou Vermelho)
 1 x  Prop Hub Assembly for EME55/DLE55 Gasoline Engine
 1 x  Rcexl Spark Plug Caps and Boots for NGK -BMR6A-14MM KIT
 1 x  TTPN1514 JUNTA ESCAPE PRO-36/GP25-40
 1 x  SET JUNTAS PRO SE 46
 1 x  26300/221031 Wedge GF 45i
 1 x  VELA ROSSI R-1 (extra quente)
 1 x  Rcexl 1/4-32 ME8 Iridium Spark Plug
 1 x  Rossi - R4 Glow Plug Cold
 1 x  Rossi - R1 Glow Plug Hot
 1 x  Rossi - R3 Glow Plug Medium
 1 x  MM3536 Motor Mounts for C3536 motor
 1 x  MM3530 Motor Mounts for C3530 motor
 1 x  18113 Turnigy Aerodrive SK3 - 2122-2100kv Brushless Outrunner Motor 64W
 1 x  EM350 ELECTRIC MOTOR (370 SIZE)
 1 x  CN08-PLUS ELECTRIC MOTOR
 1 x  Large Current Switch Harness W/Battery Checker
 1 x  Abraçadeiras de velcro 125mm (15 peças, 5 cores) - Pro'sKit MS-V305
 1 x  Conjunto manga termoretráctil, tamanhos pequenos (24pcs.)
 1 x  JP HEAT SHRINK 3 x 100mm RED/BLACK (12 PIECE)
 1 x  WireLabels - servo wire label heatshrink (14mm x 1m)
 1 x  HY-288 Heat Shrink Tube 12.0mm AZUL (1M )
 1 x  HY-320 Heat Shrink Tube 16.0mm Verde (1M)
 1 x  HY-305 Heat Shrink Tube 14.0mm VERDE (1M)
 1 x  HY-318 Heat Shrink Tube 16.0mm AZUL (1M)
 1 x  HY-291 Heat Shrink Tube 12.0mm VERDE (1M)
 1 x  HY-299 Heat Shrink Tube 14.0mm PRETO (1M)
 1 x  HY-301 Heat Shrink Tube 14.0mm VERMELHA (1M)
 1 x  HY-275 Heat Shrink Tube 10.0mm AMARELA (1M)
 1 x  HY-276 Heat Shrink Tube 10.0mm VERDE (1M)
 1 x  HY-285 Heat Shrink Tube 12.0mm PRETA (1M)
 1 x  HY-287 Heat Shrink Tube 12.0mm VERMELHA (1M)
 1 x  HY-273 Heat Shrink Tube 10.0mm VERMELHA (1M)
 1 x  HY-273 Heat Shrink Tube 10.0mm AZUL (1M)
 1 x  HY-271 Heat Shrink Tube 10.0mm PRETA (1M)
 1 x  HY-265 Heat Shrink Tube 8.0mm AMARELA (1M)
 1 x  HY-263 Heat Shrink Tube 8.0mm AZUL (1M)
 1 x  HY-260 Heat Shrink Tube 8.0mm VERMELHA (1M)
 1 x  HY-248 Heat Shrink Tube 6.0mm VERDE (1M)
 1 x  Elastic Velcro Set 22CM x 2CM (3 pcs)
 1 x  4431753 Elastic Velcro Set 50CM x 3.8CM (2pcs)
 1 x  5295757 Velcro Set 15CM x 1.3 CM (6pcs)
 1 x  Velcro Set 30CM x 2CM (5pcs)
 1 x  HS-1R Heat Shrink Tube 3.0mm AMARELA (1M)
 1 x  HS-1R Heat Shrink Tube 3.0mm AZUL (1M)
 1 x  HS-1R Heat Shrink Tube 3.0mm VERDE (1M)
 1 x  7109495 Heat Shrink Tubing 4.0mm AZUL (1M)
 1 x  HY-246 Heat Shrink Tube 6.0mm AZUL (1M)
 1 x  HY-246 Heat Shrink Tube 6.0mm AMARELO (1M)
 1 x  SPEKTRUM DX9 Black Edition 9 Canais 2.4 GHz DSMX (sem Receptor)
 1 x  RadioLink AT-9 2.4G 9CH + R9D 9CH Receiver

Sub-total: 4.388,95€
Total: 4.388,95€
Ver carrinho | Encomendar
 
Mais vendidos
T plug with groove 1 par T plug with groove 1 par
0,60€  
Servo Extension  Cable 300mm Futaba  26# Servo Extension Cable 300mm Futaba 26#
0,70€  
FJT100-1 Servo Extension Cable 100mm Futaba 26# FJT100-1 Servo Extension Cable 100mm Futaba 26#
0,40€  
VELA OS No.8 VELA OS No.8
0,00€  
Servo Extensão Flat Cable  500mm Futaba 26# Servo Extensão Flat Cable 500mm Futaba 26#
0,70€  
5 5 Estrelas!
Servo Extension Y Cable 300mm Futaba 26# Servo Extension Y Cable 300mm Futaba 26#
1,00€  
CHAPA BALSA 2x100x1000 mm. CHAPA BALSA 2x100x1000 mm.
0,00€  
Servo Extension Cable 200mm Futaba 26# Servo Extension Cable 200mm Futaba 26#
0,50€  
Graupner Balsa  1X100X1000MM Graupner Balsa 1X100X1000MM
0,90€  
TPD04 Gold Bullet Connector Plug 4 mm (par) TPD04 Gold Bullet Connector Plug 4 mm (par)
0,35€  
Arame de aço  para linkagem  2,0mm x1000mm (Uni: 1) Arame de aço para linkagem 2,0mm x1000mm (Uni: 1)
1,00€  
Rcexl Opto Gas Engine Kill Switch Version 2.0 Rcexl Opto Gas Engine Kill Switch Version 2.0
14,90€  
EC5 Style Connector (5.0mm)  1 PAR EC5 Style Connector (5.0mm) 1 PAR
1,50€ 1,10€  
HELICE NYLON 10X6 HELICE NYLON 10X6
2,30€  
HELICE NYLON 11X6 HELICE NYLON 11X6
1,50€  
Tubo para gasolina  (7*4mm) Amarelo Tubo para gasolina (7*4mm) Amarelo
3,80€  
Gold Bullet Connector Plug 6 mm  (par) Gold Bullet Connector Plug 6 mm (par)
0,60€  
CHAPA BALSA 6x100x1000 mm. CHAPA BALSA 6x100x1000 mm.
0,00€  
HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V) HT55 SERVO MICRO 1.3kg.-0.14Sg.(6V)
11,60€  
CHAPA BALSA 3MM  X 100 X 1000 CHAPA BALSA 3MM X 100 X 1000
2,60€  
Vara de fibra de carbono maciço diam. 2.0mm.x1mt Vara de fibra de carbono maciço diam. 2.0mm.x1mt
1,90€  
JP FUEL FILTERS (2 uni:) JP FUEL FILTERS (2 uni:)
1,30€  
Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S) Alarme para avisar Bateria Fraca em voo (LiPo/2S/3S/4S)
3,60€  
Tubo de Silicone transparente  2,4*5.,5mm (1metro) Tubo de Silicone transparente 2,4*5.,5mm (1metro)
1,30€  
Vara de fibra de carbono maciço diam.3mmx1000mm Vara de fibra de carbono maciço diam.3mmx1000mm
3,10€  
Heavy Duty 22# Flat Cable 450mm Futaba Color Heavy Duty 22# Flat Cable 450mm Futaba Color
0,70€  
22# Heavy duty Flat extension Y cable 300MM Futaba Color 22# Heavy duty Flat extension Y cable 300MM Futaba Color
1,00€  
Easy type Y cable 300mm ( Uni: 1) Easy type Y cable 300mm ( Uni: 1)
0,25€  
ZAP Z-EPOXY 30Min. (bote 237 ml.) ZAP Z-EPOXY 30Min. (bote 237 ml.)
0,00€  
Turnigy LSD 6.0V 2300mAh Ni-MH Flat Receiver Pack Turnigy LSD 6.0V 2300mAh Ni-MH Flat Receiver Pack
12,60€  
25100 ELASTICOS 100MM (10 uni:) 25100 ELASTICOS 100MM (10 uni:)
2,50€  
CNC Alloy Servo Arm Long (Futaba) CNC Alloy Servo Arm Long (Futaba)
7,10€  
Sponge Wheel D60 x H19 xΦ3mm Uni:1 Sponge Wheel D60 x H19 xΦ3mm Uni:1
2,25€  
Rcexl Cable Plug Holder  10pcs Rcexl Cable Plug Holder 10pcs
3,80€  
Nylon XT90 Connectors Female (1pc ) Nylon XT90 Connectors Female (1pc )
1,10€  
Lipo battery voltage tester and Low voltage buzzer alarm Lipo battery voltage tester and Low voltage buzzer alarm
6,30€  
CHAPA BALSA 5x100x1000 mm. CHAPA BALSA 5x100x1000 mm.
0,00€  
Nylon XT90 Connectors Male (1pc) Nylon XT90 Connectors Male (1pc)
1,10€  
Plastic Push Rod connector Φ2×23mm×5×8 10pcs Plastic Push Rod connector Φ2×23mm×5×8 10pcs
2,60€  
EXHAUST DEFLECTOR LARGE (60-140 SIZE) EXHAUST DEFLECTOR LARGE (60-140 SIZE)
4,50€  
 

Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)

Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Clique para ampliar
Preço: 77,00€
Disponibilidade: Existente
Referencia: 9114000020-0
Fabricante: GrotoModelismo
Classificação média: Sem classificação


The Turnigy TGY-i6 is a great entry level 6-channel telemetry 2.4ghz computer transmitter that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology. The Turnigy TGY-i6 has both a nice quality look and feel, while the programming is simple to use. The TGY-i6 also has an impressive list of features and includes a TGY-iA6 6-channel receiver. Suitable for both model Heli and Airplane, the Turnigy TGY-i6 is a superb budget computer radio for both new pilots and experienced pilots alike!

The ultra slim case design ergonomically fits your hands leading to less hand fatigue especially during long flights. Digital trims, backlit LCD screen, and simple programming give the TGY-i6 a modern feel with all the features you want. With a low profile antenna, the TGY-i6 is easy to store and no worries about breaking it. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers. For changing flight modes or multiple flap position options, the TGY-i6 has a 3-position switch, as well as two adjustable knobs.

Expand the capabilities of your models or just know what is going on with the optional telemetry receivers and variety of sensors. Normally you would have to spend hundreds of dollars to get a transmitter with this capability. Not so with the availability of the TGY-i6.

For the price, the features the TGY-i6 offers make this one of the best radios available dollar for dollar.

Features:
• Entry level 6 channel 2.4ghz radio with telemetry capability
• Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches
• Easy to use Programming & Navigation Buttons
• Supports Heli/Standard Wing/Elevon/V-Tail
• 20 Model Memory
• 8 Character Model Name
• Trainer and charging ports
• Backlit LCD Screen displays real time transmitter and receiver voltage
• 4 Stick Mode Selectable
• Optional telemetry receivers and sensors available separately

Basic Programm Functions:
Dual Rates
Sub Trim
Travel Adjust
Channel Reverse
Swash Mix
Gyro Sensitivity
Throttle Curve
Monitor
Pitch Curve
Throttle Hold
Model Name
Timer

Turnigy TGY-i6 Transmitter Specs:
Frequency: 2.4ghz ISM Frequency Range
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 1.5v x 4 AA
Dimensions: 174x89x190mm
Weight: 392g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Turnigy iA6 Receiver Specs:
Channel: 6
Frequency: 2.4g ISM Frequency Range
Power: 4.5V~6.6V/<30ma
Net Weight: 6.4g
Dimensions: 40.4x21.1x7.35mm

Requires:
4 x AA Type Battery For Operation

*Note: Receiver power telemetry feedback is available using the standard i6 receiver. To use telemetry sensors such as the RPM/Speed (TGY-CPD01 magnetic or TGY-CPDO2 Optical), or Temperature (TGY – CTM01) you will need to use the TGY-iA10 receiver or the Turnigy TGY iA6B V2 full range receiver to enable all flight telemetry information functions listed in the Accessories listing below. If you need more channels for larger airplanes, the TGY-CEV01 can help you to expand from one channel to four more channels
.

Escrever opinião
Nome:


Opinião: Note: HTML não está traduzido!

Classificação: Mau            Bom

Entre o código na caixa abaixo:

Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Clique para ampliar
Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Clique para ampliar
Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Clique para ampliar
Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Clique para ampliar